Mitsubishi Electric MELSEC Q Series Reference Manual page 459

(4) Program example
The following shows a program in which a remote STOP request is sent to the QCPU of station No.2 (target
station) when M181 turns ON.
(a) System configuration example
RSTOP
CPU module
instruction
request
Network module
source
(Own station)
RSTOP
CPU module
(b) Devices used in the program example
• Special relay (SM), link special relay (SB), and link special register (SW)
Device
SM400 Always ON
SB0047 Baton pass status (own station)
Remark
• For details of link special relay (SB):
• For details of link special register (SW):
• Devices used by the user
Device
M181 Start contact
M185 Completion device
Station No.1
CC-Link IE
Controller
Channel 3
Network No.1
CC-Link IE
Controller
Network module
Station No.4
Description
Page 568, Appendix 1
Description
CHAPTER 9 DEDICATED INSTRUCTIONS
Station No.2
RSTOP
CPU module CC-Link IE
instruction
Controller
request
Network module
target
(Target station)
STOP
CPU module CC-Link IE
Controller
Network module
Station No.3
Device
SW0032 Send/receive instruction (3) processing result
SW00A0.1 Baton pass status of station No.2
Page 584, Appendix 2
Device
M186 Completion status indication device
D620 Error code storage device
Description
Description
457
9