Mitsubishi Electric MELSEC Q Series Reference Manual page 184

(6) Station No.
When "Specify Station No. by Parameter" has been selected for the station No. setting method, set a station No.
of the CC-Link IE Controller Network module.
(Setting range for Universal model QCPU: 1 to 120, Default: None)
(Setting range for other than Universal model QCPU: 1 to 64, Default: None)
● Station No. can be set within the range set in "Total Stations" for the control station.
When skipping a station No, specify the number to be skipped as a reserved station. (
● Prevent any station No. duplication on the same network.
● The control station can be set to any station No.
(7) Mode
Select an operation mode of the CC-Link IE Controller Network module. (Default: Online)
Item
Online
Offline
H/W Test
Self-Loopback Test
Circuit Test
Test between Station
(8) Station No. setting method
For normal stations of Universal model QCPUs, select a station No. setting method.
For a QCPU other than a Universal model QCPU or the control station type, the setting is fixed to "Specify Station
No. by Parameter".
Item
Specify Station No. by
Parameter
Specify Station No. by Program
*1 For a multiple CPU system consisting of Universal model QCPU(s) and any other QCPU(s), set the station No. of the
CC-Link IE Controller Network module by network parameters. (
182
Normal operation mode
• Connects the own station to the network.
• Exchanges data with other stations.
Operation stop mode
• Disconnects the own station from the network.
• Does not exchange data with other stations.
Hardware test mode ( Page 152, Section 5.4.1)
Self-loopback test mode (
Circuit test mode ( Page 165, Section 5.6.1)
Station-to-station test mode (
Station No. is set in "Station No." of network parameters. (
(6))
Station No. is set with the UINI instruction. (
Description
Page 157, Section 5.4.2)
Page 169, Section 5.6.2)
*1
Description
Page 476, Section 9.18)
Page 137, Section 4.6 (3))
Page 200, Section 6.3.5)
Page 182, Section 6.2