Mitsubishi Electric MELSEC Q Series Reference Manual page 584

No. Name
Power status
SB0190 consistency check of
each station
Group cyclic
SB01A0 transmission station
information
Each station's CPU
SB01B0
type information
Redundant system
SB01C0
information
582
Stores the external power supply status of the CC-Link IE Controller Network
module with external power supply function on each station. (Including own
station)
OFF: External power supplied to all stations (Normal)
ON: No external power supplied to some station(s) (Error)
When no external power is supplied to some station(s) (error), each station
status can be checked in Power status consistency check of each station
(SW0190 to SW0197).
Depending on the link refresh timing, Power status consistency check of
each station (SW0190 to SW0197) and the update may be offset by one
sequence scan.
(Condition)
Valid when Baton pass status (own station) (SB0047) is OFF.
When Baton pass status (own station) (SB0047) is turned ON (error), data
prior to error are held.
Stores shared group setting information on the stations (including the own
station).
OFF: Station in shared group different from own station not exist.
ON: Station in shared group different from own station exists.
If a station in a different shared group exists, the station status can be
checked by Group cyclic transmission station information (SW01A0 to
SW01A7).
Depending on the link refresh timing, Group cyclic transmission station
information (SW01A0 to SW01A7) and the update may be offset by one
sequence scan.
Stores CPU type information on the stations (including the own station).
OFF: No Basic model QCPU or safety CPU
ON: Station of Basic model QCPU or safety CPU exists.
If any station has a Basic model QCPU or safety CPU, each station's status
can be checked by Each station's CPU type information (SW01B0 to
SW01B7).
Depending on the link refresh timing, Each station's CPU type information
(SW01B0 to SW01B7) and the update may be offset by one sequence scan.
Stores redundant system information on the stations (including the own
station).
OFF: No redundant system station
ON: Redundant system station exists.
If any station is configured as a redundant system, each station's status can
be checked by Redundant function support information (SW01C0 to
SW01C7).
Depending on the link refresh timing, Redundant function information
(SW01C0 to SW01C7) and the update may be offset by one sequence scan.
Description
Availability
Control Normal
station station