Mitsubishi Electric MELSEC Q Series Reference Manual page 589

No. Name
SW0041 Group No.
SW0042 Station No.
SW0043 Mode status
SW0044 Station setting
SW0046 Module type
Baton pass status
SW0047
(own station)
Stores the group No. of own station.
0: No group specification
1 to 32: Group No.
Stores the station No. of own station.
1 to 120: Own station No. (Station No. setting status (own station)
(SB0070) is OFF.)
255: Station No. not yet determined (Station No. setting status
(own station) (SB0070) is ON.)
Stores the operation mode of the own station.
0: Online
2: Offline
5: Station-to-station test
6: Circuit test
7: Self-loopback test
9: Hardware test
Stores the setting status of own station.
b15b14 to b6
0 to
SW0044
CPU type
0: Other than Basic model QCPUs and
safety CPUs
1: Basic model QCPU or safety CPU
Stores the hardware status of own station.
b15 b14 to b9 b8 b7 b6 b5 b4 b3
SW0046 0 to 0
*
b15: Variable (used in the system)
Stores the communication status of own station.
0: Data linking
1: Data link stop in execution
2: Baton pass being executed
3: Baton pass stop in execution
4: Test being executed
5: Offline
Description
b5 b4 b3 b2 b1 b0
0 0 0
Network type
(01: Controller network)
Station type
(0: Normal station, 1: Control station)
Normal station parameter
0: No normal station parameter
1: Normal station parameter
Mode
0: CC IE Control
1: CC IE Control Extended Mode
b2 b1 b0
Transmission path information 1
(00: Optical)
Transmission path information 2
(0: Duplex system)
Topology
(0: Loop type)
Cable type
(0: Supports SX)
External power supply function
(0: Not provided, 1: Provided)
Model type
001: Module
010: Board
110: HMI
APPENDICES
Availability
Control Normal
station station
A
587