Select Station Network Device Status Display - Mitsubishi Electric MELSEC Q Series Reference Manual

10.3.2

Select station network device status display

The detailed information of the selected station is displayed.
A module is selected here. For selection of a board or terminal display, refer to the relevant manual.
(1) Description of select station network device status display
Item
Group No.
Shared Group No.
Mode
IP address
Network Type
Operating status
Select station network device
status display
Description
Displays a group number of the selected station.
Displays a shared group number of the selected station.
Displays the mode of the selected station.
Displays the IP address. (This applies only when the address is set to
the control station.)
Displays a type of the selected station.
Normal operation
Operation error (data link continued) (yellow)
Operation error (data link discontinued) (red)
Page 148, Section 5.3 (1)
CHAPTER 10 TROUBLESHOOTING
Display content
0 to 32
0 to 120
Online
Offline
H/W Test
Self-Loopback Test
Circuit Test
Test between Station
• Control station: Value set with
GX Works2
• Normal station: Value
automatically assigned from
the control station
• When the address is not set:
-.-.-.-
CC IE Control Ext. Mode
CC IE Control
531
10