Interrupt Settings - Mitsubishi Electric MELSEC Q Series Reference Manual

6.6

Interrupt Settings

Set the conditions for sending an interrupt request to the CPU module. (
Up to 16 interrupt conditions can be set.
1.
Configure the network setting. (
2.
Open the setting window in the programming tool.
Project window
3.
Configure settings with reference to the description below.
4.
Click the
Page 180, Section 6.2)
[Parameter] [Network Parameter]
button
button.
CHAPTER 6 PARAMETER SETTING
Page 135, Section 4.5)
[Ethernet/CC IE/MELSECNET]
6
225