NEC NEAX2400 IPX Programming Manual page 966

I-16
General Description
This feature allows an Attendant to visually identify the type of service and/or trunk route which is arriving or
waiting to be answered at the Attendant Console through CCIS.
Operating Procedure
No manual operation is required.
Service Conditions
1. A flashing lamp indicates a call waiting to be answered.
2. A steady lamp indicates an answered call.
3. A maximum of 12 lamp and key groups can be associated with INCOMING CALL IDENTIFICATION
- CCIS.
4. Lamps and keys are assigned as follows:
LDN
WATS
FX
ATND
RECALL
ICPT
NANS
BUSY
TIE
5. More than one INCOMING CALL IDENTIFICATION lamp can be lit at the same time on the Attendant
Console. The Attendant can select any incoming call by pressing the associated key.
6. Calls can be answered via the ANSWER key for first-in, first-out priority.
7. The Attendant Console is limited to 12 unique INCOMING CALL IDENTIFICATION indications.
However, more than one incoming trunk route can be programmed for the same INCOMING CALL
IDENTIFICATION.
Interactions
1. To fulfill the requirements of the feature description, Step 1 of Programming is not required. However, the
CALL WAITING LAMP [C-13] should be programmed in relationship to the INCOMING CALL
IDENTIFICATION.
2. System Data 2, Index 8, Bits 6 and 7 and Index 9, Bit 0-3 can be flagged to represent an incoming call, but
the meaning of the incoming call can be reassigned via the AAKP command.
3. The first six keys (LDN to CCSA) are fixed and cannot be changed. The AAKP command is used to
program the remaining six optional keys.
Programming
STEP 1: ASYD - System Data 2, Index 8 & 9. Flag the type of incoming calls the Attendant Console should
expect.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Incoming Call Identification - CCIS
Incoming Call Identification - CCIS
Listed Directory Number
Wide Area Telephone Service
Foreign Exchange
Attendant Call
Transfer to Attendant
Intercept
Station No Answer
Call Forwarding Busy
TIE Line
I-16
Page 923