Table of Contents
Advertisement
Programming
STEP 1:
ASYD - System Data 1, Index 4, Bit 6. One burst of ringing at forwarding station when CALL
FORWARDING-ALL CALLS - CCIS is in service? 0/1: No/Yes.
System Data 1, Index 69, Bit 1. A burst of ringback tone to alert the person receiving a call that this is
a CALL FORWARDING-ALL CALLS - CCIS call. In service? 0/1: No/Yes. Normally assigned as
data "0".
System Data 2, Index 6, Bit 4. Enable stations set for CALL FORWARDING-ALL CALLS - CCIS be
allowed to use their phones normally. If data "0" is assigned, the station will only be able to call the
Attendant Console. Assign on a per-tenant basis.
STEP 2:
ANPD - Reserve a number level for feature access and cancel. Assign for Normal (N), Hooking (H),
and Busy (B). Assign NND in accordance with a predetermined numbering plan.
STEP 3:
ASPA - Assign an access code to CALL FORWARDING-ALL CALLS - CCIS entry, SID = 8 and to
CALL FORWARDING-ALL CALLS cancel SID = 9. Assign Connection Status Index (CI) for
Normal (N) service.
STEP 4:
ASFC - Assign a Service Feature Class that allows SFI = 7 to the stations that activate CALL
FORWARDING-ALL CALLS - CCIS.
STEP 5:
AKYD - For D
programmable line/feature key. Assign Type:Function:CALL FORWARDING-ALL CALLS [2].
STEP 6:
ADSL - Assign FDA key; Assign SN=1 (Originating; DT Connection) and FKY=2 (Call Forwarding -
All Calls).
This command is used for assigning a function to each soft key.
STEP 7:
ATNR - Allow tenant-to-tenant connection for Inter and Intra-tenant connections. Assign Tenant
Restriction Index (TRI) = 1. For this feature to be set by the Attendant Console, assign Inter and Intra-
Tenant connection via the Attendant Console. TRI = 3.
STEP 8:
ACFS - CALL FORWARDING can also be assigned in this command.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Call Forwarding - All Calls - CCIS
term
sets, CALL FORWARDING-ALL CALLS - CCIS may be assigned to a
C-45
Page 831
Advertisement
Table of Contents
