NEC NEAX2400 IPX Programming Manual page 413

Feature programming manual

Hide thumbs Also See for NEAX2400 IPX:

Table of Contents

General Description

This feature allows the system to exchange both speech and FCCS signals over Internet/Intranet. To establish/

release a call, the following two connection patterns can be selected:

IPTRK Point-to-Point Connection:

IPTRK Point-to-Multipoint Connection: For both speech and FCCS signal channels, an IPTRK circuit card

Point-to-Point Connection is functionally a kind of form within Point-to-Multipoint Connection.

Connection via Cisco router:

FCCS Networking via IP

For both speech and FCCS signal channels, an IPTRK circuit card

is used. At this time, the IPTRK cards in the self-node and each of

its connected node(s) must be in 1-to-1 ratio.

is used. At this time, the IPTRK card, accommodated in the self-

node, can be connected to multiple destinations (i.e. IPTRK cards

of multiple nodes).

FCCS Network is realized via the Internet/Intranet.

IPTRK: Point-to-Point Connection/Point-to-Multipoint Connection

Point-to-Multipoint Connection

Both Speech and FCCS Signal

To establish an FCCS link, Q-SIG is used between the system and

FCCS Network is realized via the Internet/Intranet.

Connection via Cisco router

IPTRK: IP Trunk

NEAX2400 IPX Feature Programming Manual

NDA-24297, Issue 1