D-32D Dual Hold - D Term - NEC NEAX2400 IPX Programming Manual

D-32D
General Description
This feature allows two D
originate a call from a subline appearance or the idle prime line.
Operating Procedure
To place a call in a DUAL HOLD-D
term
1. When two D
term
other D on hold.
term
2. If the held D
user presses the pre-assigned HOLD key and places the connection in a DUAL HOLD-D
To place back to the original connection
term
1. The D user goes off-hook and presses the held line.
term
2. The held D
term
3. The held D
original call.
Service Conditions
1. The DUAL HOLD - D
term
two D s.
2. While a call is being held, Automatic Recall is initiated after a preprogrammed time on the D
placed the call on Hold.
3. For STATION MESSAGE DETAIL RECORDING SYSTEM [S-10] information between extensions, a
call is regarded as completed when the HOLD key is pressed to hold the call. When both stations answer
the held call, it is processed as a new call.
4. Even in the case of a call between two D
Secretary after the Boss/Secretary service, or between overriding and overridden parties after the
PRIVACY RELEASE [P-18] service.
5. This feature is not restricted by the Class of Service for the stations in the network.
6. The following services are available to either the holding line or the line placed on hold when a call is held
by pressing the HOLD key in a DUAL HOLD - D
CALL BACK
MESSAGE REMINDER
7. The following services are not available to either the holding line or the held line in a DUAL HOLD - D
situation:
ATTENDANT CAMP-ON WITH TONE INDICATION
BUSY VERIFICATION
CALL WAITING - ORIGINATING
CALL WAITING - TERMINATING
EXECUTIVE RIGHT-OF-WAY
PRIVACY RELEASE
8. DUAL HOLD-D
BOSS-SECRETARY Service
PRIVACY RELEASE
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Dual Hold - D
Dual Hold - D
term
s to simultaneously be placed on hold. This allows the held parties to answer or
term
condition
s are connected, either D
user wishes to originate or answer another call from a sub-line appearance, the held D
hears MUSIC ON HOLD [M-7] if originally connected D
comes back to the original call if originally connected D
term
feature can be activated by pressing the HOLD key during a call between any
term
cannot be activated for calls established by:
term
term
user can press the pre-assigned HOLD key and place the
term
s, DUAL HOLD - D
term
situation:
term
term
is still holding the call.
term
has already returned to the
term
cannot be initiated between Boss and
[C-1]
[M-19D]
[A-1]
[B-3]
[C-31]
[C-12]
[E-1D]
[P-18]
[B-5D, 8, 11]
[P-18]
D-32D
term
term
condition.
term
that
term
Page 299