NEC NEAX2400 IPX Programming Manual page 177

Feature programming manual
Hide thumbs Also See for NEAX2400 IPX:
Table of Contents

Advertisement

C-5D
Operating Procedure (cont'd)
3.
Dial the desired target telephone number; receive service set tone. The LED of the associated feature key
does not light at the station setting the service. If the multi-line appearance is another D
that station's feature key LED will light. The setting station's LCD displays:
4.
Replace the handset or press the SPEAKER key.
5.
If the target station is the operator, the LCD displays:
To monitor CALL FORWARDING - ALL CALLS for a multi-line appearance other than the MY Line
1.
Press the multi-line appearance. Then press the CALL FORWARDING - ALL CALLS feature key. The
LCD displays:
To cancel CALL FORWARDING - ALL CALLS for a multi-line appearance other than the MY Line
1.
Lift the handset or press the SPEAKER key; receive dial tone.
2.
Press the multi-line appearance; receive dial tone. Press the CALL FORWARDING - ALL CALLS
feature key; receive service set tone. The LCD displays:
The associated LED that is lit at another station goes out.
3.
Replace the handset or press the SPEAKER key.
Service Conditions
1.
Stations with this feature set may originate any calls and access the CALL FORWARDING - ALL CALLS
term
- D
cancellation code.
2.
All stations may simultaneously activate CALL FORWARDING - ALL CALLS - D
3.
Stations may be assigned this feature via CLASS OF SERVICE - INDIVIDUAL [C-15] programming in
system data.
4.
If Station A sets Call Forwarding to Station B, and Station B is set for Call Forwarding to Station C, calls
to Station A will be forwarded to Station B but will not be routed to Station C, unless MULTIPLE CALL
FORWARDING - ALL CALLS [M-44] has been set in system data.
5.
CALL FORWARDING - ALL CALLS - D
Page 134
Call Forwarding - All Calls - D
Target Station
FORWARD SET
(Time Display)
FWD SET OPR
(Time Display)
Target Station
FORWARD
(Time Display)
FORWARD CANCEL
(Time Display)
term
term
XXXX
XXXX
can only be set from the MY Line or sub-line.
NEAX2400 IPX Feature Programming Manual
term
's MY Line,
term
.
NDA-24297, Issue 1

Advertisement

Table of Contents
loading

Table of Contents