Busy Verification - NEC NEAX2400 IPX Programming Manual

Feature programming manual
Hide thumbs Also See for NEAX2400 IPX:
Table of Contents

Advertisement

B-3
General Description
When an Attendant places a call to a busy station, this feature allows the Attendant to break into the connection.
When this feature is initiated from the console, the system sends a Warning Tone to the stations before establishing
a three-party conference. Additionally, the Attendant Monitor Function can be activated depending on system data.
Operating Procedure
To activate
1.
Press an idle loop key and dial the desired telephone number; receive the busy tone.
2.
Press the BV key; two burst tones are sent to the connected parties. Attendant may now monitor or join
the connection.
3.
Press the RELEASE key to disengage.
To monitor the call in progress before entering the busy connection - from a station
1.
Press an idle loop key and dial the desired telephone number; receive the busy tone.
2.
Press the BV key. The Attendant can monitor the connection. (BV lamp lights.)
3.
Press the TALK key. A Warning Tone is sent, and a three-way call is established (TALK lamp lights). If
the called station is a D
4.
Press the CANCEL key to disengage; Attendant returns to the incoming call. The originally connected
parties remain connected.
Service Conditions
1.
This feature may be used during station-to-station and station-to-trunk calls (COT, FX, WATS, CCSA, or
TIE LINES).
2.
BUSY VERIFICATION cannot be established to a station when the station is:
a.) Dialing
b.) Listening to a tone
c.) Being rung
d.) Being connected to an Attendant loop
e.) Activating a conflicting feature such as:
ATTENDANT CAMP-ON WITH TONE INDICATION
ATTENDANT OVERRIDE
BOSS-SECRETARY OVERRIDE - D
CALL HOLD
CALL TRANSFER
CALL WAITING - ORIGINATING
CALL WAITING - TERMINATING
CONSULTATION HOLD - ALL CALLS
DATA LINE SECURITY
DATA PRIVACY ON DEMAND
DIAL ACCESS TO ATTENDANT
EXCLUSIVE HOLD - D
EXECUTIVE RIGHT-OF-WAY
NON-EXCLUSIVE HOLD - D
PRIVACY - D
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1

Busy Verification

Busy Verification
term
, the LCD displays OPE BV for 5 seconds, then CONF.
term
term
term
[A-1][A-45]
[A-7]
term
[B-5D]
[C-6]
[C-10] [C-11, 11D] [C-50] [C-54]
[C-31]
[C-12]
[C-17, -17D] [C-58]
[D-12] [D-66]
[D-17] [D-68]
[D-2] [D-71]
[E-4D]
[E-1, E-1D]
[N-7D]
[P-14D]
B-3
Page 81

Advertisement

Table of Contents
loading

Table of Contents