Table of Contents
Advertisement
C-52
Operating Procedure (cont'd)
2.
The Attendant presses the ANSWER key; Station B and the Attendant are connected. The number of
Station B is displayed on the Attendant Console.
Service Conditions
For the Attendant Console
1.
At the time of call origination:
a.) The called number is displayed (last 6 digits) only when the called party has answered the call.
2.
At the time of call termination:
a.) The calling number is displayed (last 6 digits) only when the Attendant has answered the
terminated call.
3.
The display of the telephone number of the station that has answered the call routed by the Attendant has
priority over this service. This is not applicable to Inter-office telephone number display in the above case.
4.
Even if the communicating party has changed during a call, the display of the telephone number remains
unchanged.
5.
As stated in the preceding paragraph, the telephone number display is made only for the station that has
first engaged in a call with the Attendant.
term
For the D
1.
Call origination: The called number is displayed (8 digits).
2.
Call termination: The calling number is displayed while the called side is being rung.
3.
Display of the telephone number of the station which has answered the call routed by the Attendant has
priority over this service. This is not applicable to inter-office telephone number display in the above case.
4.
Even if the communicating party has changed during a call, display of the telephone number remains
unchanged.
Programming
ASYD - System 1, Index 82. Assign Number Display Pattern (b
Page 858
Calling/Called Number Display - CCIS
ATT
STN (a)
CCIS
[Node A]
STN (b)
[Node B]
-b
).
4
7
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
