NEC NEAX2400 IPX Programming Manual page 461

I-21
Operating Procedure (cont'd)
Note 2: The number of digit of IZP group number is determined by SYS1, Index 804, bit 3.
bit 0=0: 2-digit (group 01~99)
bit 0=1: 3-digit (group 001~255) Ex. When IZPG=1, dial 001.
d.) To answer by using Call Pickup-Group [C-7]
OPERATION
OPERATING CALLED
PARTY PARTY
(1) Receive a
call
(2) Perform the
SHF
(3) Dial the
access code for
IZP [I-21] (IZP
key)
(4) Dial the IZP
group number
Note 2
Voice Call is made from D
speakers in the IZP group.
(1) Lift the
Handset
(2) Dial the
access code
for Call
Pickup
Group [C-7]
(Call Pickup-
Group key)
Two way conversation is made.
(5) Replace the
handset
Two way
conversation
between the
calling and
called party
is made.
The number of the chime can be set by ASYD SYS1, Index 321, b7 0/1: 4/1 time (s).
Note 1:
Note 2: The number of digit of IZP group number is determined by SYS1, Index 804, bit 3.
bit 0=0: 2-digit (group 01~99)
bit 0=1: 3-digit (group 001~255) Ex. When IZPG=1, dial 001.
Page 418
Internal Zone Paging
Ex. When IZPG=1, dial 01.
TONE CONTROL
OPERATING CALLED
PARTY PARTY
(1) Special
Dial Tone can
be heard
nd
(2) 2 Dial
Tone can be
heard
(1)Chime(s)
can be heard
Note 1
term
(2) Dial
Tone can be
heard
Ex. When IZPG=1, dial 01.
CALLING OPERATING
PARTY PARTY
XX:XX DDD2
(1) MSC
XFR
can be
heard
PG
PG GPNO
XXXXX
(2) MSC is
(time)
stopped
NEAX2400 IPX Feature Programming Manual
TERM
D DISPLAY
CALLED CALLING
PARTY PARTY
PG XXXXX
P: flash
*P=Prime Line
XXXXX
P: light
XX:XX DDD2
NDA-24297, Issue 1