Table of Contents
Advertisement
V-2D
V-2D
General Description
This feature provides a voice path between two D
built-in speaker. If the called party's MIC key is on, the called party can converse hands-free.
Operating Procedure
term
From one D
to another D
1.
The originating D
2.
The calling party presses the VOICE CALL feature key. A signal tone (two bursts) is transmitted over the
called party's speaker. The calling party's LCD displays:
From a single-line set to a D
1.
The single-line set user dials the desired D
2.
The calling party presses the switch hook, and dials VOICE CALL access code. A signal tone is
transmitted over the called party's speaker.
3.
The calling party announces the call over the built-in speaker.
Service Conditions
1.
After a voice call has been activated, the called station will appear busy on multi-line sets displaying the
called station.
2.
A voice call will follow CALL FORWARDING-ALL CALLS [C-5] and CALL FORWARDING-BUSY
LINE/DON'T ANSWER [C-2, C-3].
3.
A voice call will terminate at the station MY-LINE [M-23D].
4.
When a called station is not a D
tone.
5.
Only the called station can respond using HANDS-FREE ANSWER BACK-D
6.
If the called station is restricted from VOICE CALL SERVICE by Class of Service, status of the calling/
called party is as follows:
a.) Calling party
Single Line:
term
D
:
b.) Called party's D
7.
STATION MESSAGE DETAIL RECORDING [S-10] is not available for this service.
Page 792
Voice Call - D
Voice Call - D
term
term
term
user dials the desired telephone number and receives a ringback tone.
VOICE
(Time Display)
term
term
, a reorder tone will be sent to the calling party followed by a ringback
Receives ringback tone after hearing reorder tone for up to 30 seconds or by
pressing the switch hook during reorder tone.
When using the VOICE key: Receives ringback tone, and LCD displays VOICE
REST for 5 seconds.
When using an access code, hear reorder tone, and LCD displays VOICE REST for
5 seconds. After hearing reorder tone for 30 seconds or after pressing switch hook,
receives ringback tone.
term
continues to ring.
term
term
sets. This path exits from the calling party to the called party's
Called Number
XXXX
term
number and receives a ringback tone.
term
[H-4D].
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
