NEC NEAX2400 IPX Programming Manual page 860

Feature programming manual
Hide thumbs Also See for NEAX2400 IPX:
Table of Contents

Advertisement

Interactions (cont'd)
3.
Trunks in a station-to-trunk, TRUNK-TO-TRUNK CONNECTION [T-10], and ATTENDANT-
CONTROLLED CONFERENCE [A-2] connection may be verified when busy.
4.
ATTENDANT LOCKOUT [A-5]: The Attendant is prevented from verifying a busy station line that is
connected to a loop held at the Attendant Console. Since the LOCKOUT feature applies only to calls held
on an Attendant Console loop, BUSY VERIFICATION - CCIS of those station lines will be denied, and
the Attendant will hear reorder tone.
5.
CALL FORWARDING - CCIS (ALL CALLS [C-45], BUSY LINE [C-46] or DON'T ANSWER [C-47]):
If an Attendant attempts to busy-verify an idle or busy station line that has activated the CALL
FORWARDING - CCIS feature, BUSY VERIFICATION - CCIS of the forwarded-to station will occur.
If an Attendant attempts to busy-verify an idle or busy station that is CALL FORWARDED to the
Attendant Console, BUSY VERIFICATION - CCIS will not be allowed.
6.
CALL HOLD [C-6]: When two stations have established a connection and one of the stations has a third
party on hold, the two talking parties can be busy-verified, but the party on hold cannot be busy-verified.
7.
CALL WAITING [C-12] [C-31]: If an Attendant attempts to busy-verify a station line that already has a
waiting call, BUSY VERIFICATION will be denied. Also, if an Attendant attempts to busy-verify a
station line that is waiting for another station line, BUSY VERIFICATION will be denied.
8.
DATA LINE SECURITY - CCIS [D-66]: An Attendant cannot busy-verify a busy station line that has a
DATA LINE SECURITY [D-12] Class of Service. If BUSY VERIFICATION - CCIS is attempted, the
Attendant will hear reorder tone.
9.
DATA PRIVACY ON DEMAND - CCIS [D-68]: An ATTENDANT cannot busy-verify a busy station
line that has PRIVACY ON DEMAND - CCIS [D-68] set. If BUSY VERIFICATION - CCIS is attempted,
the Attendant will hear reorder tone.
10.
DICTATION ACCESS [D-3]: BUSY VERIFICATION - CCIS will be denied to a station that is
connected to a dictation trunk, and the Attendant will hear reorder tone.
11.
PAGING ACCESS - CCIS [P-28]: BUSY VERIFICATION - CCIS is denied when a station is connected
to a Paging trunk.
12.
DATA PRIVACY ON DEMAND [D-17]: When this feature is activated by a user, the Attendant Console
is denied BUSY VERIFICATION toward that station. This prevents disturbance of any ongoing data
transmission.
13.
STATION HUNTING (CIRCULAR [S-7], SECRETARIAL [S-8] or TERMINAL [S-9]): If an Attendant
attempts to busy-verify a busy station in a Hunt Group, station hunting will take precedence over BUSY
VERIFICATION - CCIS and the call will hunt. If all stations in the Hunt group are busy, the called station
will be busy-verified.
14.
UNIFORM CALL DISTRIBUTION (UCD) [U-1]: An Attendant can busy-verify any station in a UCD
group, other than the Pilot, without causing a hunt. However, if BUSY VERIFICATION - CCIS is
attempted to the Pilot station, UCD hunting will take precedence over BUSY VERIFICATION - CCIS.
Programming
STEP 1:
ASYD - System Data 1, Index 60, Bit 6.
Is the two-burst Warning Tone to be disabled? 0/1: No/Yes.
System Data 1, Index 68. Bit 4. Trunk Select (TKSL) key must be enabled.
Assign data "1".
System Data 1, Index 158. ATTCON Busy Verification Warning Tone Timer: the interval between
BUSY VERIFICATION tones. ROM data is 14 sec.
System Data 2, Index 0, Bit 3, assign as data "1".
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Busy Verification - CCIS
B-9
Page 817

Advertisement

Table of Contents
loading

Table of Contents