NEC NEAX2400 IPX Programming Manual page 542

Service Conditions (cont'd)
d.) If the forwarding sequence, after a CALL FORWARDING - DON'T ANSWER [C-3] goes
through several stations with CALL FORWARDING - ALL CALLS [C-5] set and ends up at the
original CALL FORWARDING - DON'T ANSWER [C-3] station, CALL FORWARDING -
DON'T ANSWER [C-3] is not activated.
e.) If the forwarding sequence, after a CALL FORWARDING - DON'T ANSWER [C-3] goes
through several busy stations with CALL FORWARDING - BUSY LINE [C-2] set and ends up
at the original CALL FORWARDING - DON'T ANSWER [C-3] station, CALL FORWARDING
- DON'T ANSWER [C-3] is not activated.
5. If a call is transferred blind to a station that is CALL FORWARDED - DON'T ANSWER [C-3] to another
destination (internal or external), the call will not forward but will recall back to the transferee station. This
recall parameter is controlled by system data.
6. Forwarding to an Attendant Console:
a.) If an Attendant Console is the destination of MULTIPLE CALL FORWARDING - DON'T
ANSWER [M-25], the call is forwarded to the Attendant Console that handles the tenant to which
the CALL FORWARDING - DON'T ANSWER [C-3] station belongs.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Multiple Call Forwarding - Don't Answer
Call Forwarding - Don't Answer
A
Call Forwarding - Don't
Call
Answer is not made in
this situation - the call
continues ringing on A.
S
Call Forwarding - Don't Answer
A
Call Forwarding - Don't
Call
Answer is not made in
this situation - the call
continues ringing on A.
S
Call Forwarding - All Calls
B
C
CF-A
CF-A
Busy
B
C
Busy
CF-B
CF-A
D
Call Forwarding -
Busy Line
D
M-25
Page 499