Table of Contents
Advertisement
V-2
V-2
General Description
This feature enables a single line telephone to make a VOICE CALL [V-2] when the called party is a D
path exists from the calling party to the called party's built-in speaker. If the called party's MIC is on, the called party
can converse hands-free.
Operating Procedure
From a single line station to a D
1.
Dial the telephone number of the desired D
2.
Perform a switch hook flash.
3.
Dial the VOICE CALL access code. A signal tone (two bursts) is transmitted over the called party's
speaker.
term
4.
Called D
displays:
5.
Announce the call over the built-in speaker.
Service Conditions
1.
When the called station is not a D
time, followed by ringback tone.
2.
Once a VOICE CALL has been activated, the called station will appear busy on multi-line sets displaying
the called station.
3.
VOICE CALL will follow CALL FORWARDING - ALL CALLS [C-5] and CALL FORWARDING -
BUSY/DON'T ANSWER [C-2, 3].
4.
VOICE CALL will terminate at the station whose my line is the same as the extension called.
5.
Only the called station can respond HANDS-FREE [H-5D].
6.
STATION MESSAGE DETAIL RECORDING SYSTEM [S-10] is not available for this service.
Programming
For a Single-Line Set
STEP 1:
ASYD - System Data 1, Index 17, Bit 0. Hooking (H) service for single-line set. This is used for the
MESSAGE REMINDER [M-19] and VOICE CALL features of a single-line set.
STEP 2:
ANPD - Reserve a number level for feature access. Assign Connection Indexes, CI = N, H, B; Normal
(N), Hooking (H), and Busy (B) (applicable to any feature assigned to this level). Assign NND in
accordance with a predetermined numbering plan.
STEP 3:
ASPA - Assign an access code to VOICE CALL, SRV = SSCA, SIDA = 41.
Connection Status CI = H, Hooking (H).
STEP 4:
ASFC - Assign a Service Feature Class that allows SFI = 52 to single-line stations which will be
allowed to initiate Voice Calls.
Assign a Service Feature Class allowing SFI = 93 to D
CALL.
Page 790
Voice Call
Voice Call
term
term
station and receive ringback tone.
VOICE
(Time Display)
term
, reorder tone will be sent to the calling party for a pre-determined
XXXX
term
stations that do not allow access by VOICE
NEAX2400 IPX Feature Programming Manual
term
set. This
NDA-24297, Issue 1
Advertisement
Table of Contents
