Table of Contents
Advertisement
Service Conditions (cont'd)
20.
When activating this service, swap of the Speed Calling - One Touch key data start upon replacement of
the handset. It takes approximately 42 seconds for the Speed Calling key data to swap, and during this
time, Follow Phone Service and Speed Calling - One Touch operations are restricted.
21.
After this service is activated, and if DM load reset is activated before the data is backed up to the hard
disk, the stations return to the previous status. However, this is not the case with the Speed Calling - One
Touch keys.
22.
The DSS Console data does not swap. The My Line of the connected D
reassignment of DSS data and cabling will be necessary. The above is the same when using DSS as an
Add-On Module.
23.
This feature is only available for stations in the same node within the FCCS network.
Interactions
This service is restricted for a D
Programming
STEP 1:
ANPD - Assign the minimum necessary number of digits for the first number of the SWAP access
code.
STEP 2:
ASPA - Assign the access code for SWAP. CI = N (Normal), SRV = SSCA (Service Code Appendix),
SIDA = 96, SWAP.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Follow Phone
term
using Expanded Multiple Line Operation - D
term
may swap, but in this case,
term
[E-26].
F-31
Page 367
Advertisement
Table of Contents
