Table of Contents
Advertisement
C-20
Programming (cont'd)
STEP 7:
ACSI - Assign the Incoming Satellite trunks to be answered at the Main system CSI = 3, Direct In
Termination, Day and Night Mode. Then assign the stations programmed above. This ties incoming
trunks to the PA-4ODTs.
STEP 8:
ACFR - Assignment of Call Forwarding Restriction. Upon determining which types of Call Class
Indexes (CCI) will be answered at the Main system, such as LDN (DDD), WATS, FX; allow those
CCI a Transfer Service Feature Index of 15, CAS Line.
STEP 9:
ACSA - (Optional) Use this command rather than ACSI if CAS operation is desired in Day mode, and
if incoming trunks are to stay at the satellite and be answered by TAS or a NIGHT CONNECTION -
FIXED/FLEXIBLE [F-1/2] station in Night mode.
Page 192
Centralized Attendant Service (CAS)
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
