Table of Contents
Advertisement
C-150
Service Conditions (cont'd)
41.
The ELC cards to display the indication for the operation procedure on the LCD when confirming the
latest calling number or the registered Restriction Number is shown below.
CIRCUIT CARD NAME
PA-16ELCH
PA-16ELCJ
PA-DAIA
PA-DAIB
PA-DAIC
PA-DAIG
PA-DAIH
PA-DAIJ
PA-DAIG-A
PA-DAIH-A
PA-DAIJ-A
Interactions
1.
Call Forwarding - All Calls [C-5] takes precedence over this feature.
2.
If this service is set at both the station and MAT, the station has priority.
3.
When the data on a station is changed by FOLLOW PHONE [F-31] service, the registered Restriction
Number on the station is carried over to the next user.
4.
When a station is deleted, the registered Restriction Number on the station is also deleted.
5.
When activating with DUAL STATION CALL [D-156], CALL BLOCK is available only for the Main
Station.
Programming
STEP 1:
ASYD - System Data 1, Index 322, Bit 5. Assign the sending tone when Call Block is set.
0/1 DT/SPDT
SYS1, Index 80, b1. Decide the cancel key for the registered Restriction Number.
0/1 = "#" key, "*" key
STEP 2:
ASPA - Assign the access code for Call Block, SRV = SSCA, SIDA = 111 (ACC for the latest
incoming call is to be the Restriction Number), SIDA=112 (ACC for assigning the Restriction Number
by dialing an optional number), SIDA=113 (ACC for cancelling the Restriction Number)
STEP 3:
ASFC - Assign a Service Feature Class to allow CALL BLOCK [C-150] for the stations. SFI = 165,
RES = 1 (to release the restriction)
STEP 4:
AKYD - Assign the key data for CALL BLOCK on the feature key of D
and FKY = 128 (Call Block Key)
Page 250
Call Block
PROGRAM
SP-3124 16ELCH PROG-D
SP-3125 16ELCH PROG-TD
SP-3270 16ELCJ PROG-A
SP-3295 16ELCJ PROG-B
SW-293 2WDLI PROGRAM-D
—SP-3126 2WDLI PROG-D
SW-362 2WDAI PROGRAM-F
—SP-3343 2WDAI PROG-G
SW-368 2WDAI PROGRAM-H
—SP-3345 2WDAI PROG-H
ISSUE
ISSUE 5 or later
ISSUE 5 or later
ISSUE 7 or later
ISSUE 6 or later
ISSUE 1F or later
ISSUE 6 or later
ISSUE 1A or later
ISSUE 1 or later
ISSUE 1A or later
ISSUE 1 or later
term
. FKI = 1 (Feature Key)
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
