Table of Contents
Advertisement
C-11D
General Description
This feature permits a D
term
The D
user can set Camp-on function to the busy destination while transferring an incoming call (Camp-on by
Station). With this feature, the trunk party is called back directly as the destination becomes idle.
Operating Procedure
To transfer a call in progress
1.
While connected with the first party, press the TRANSFER key; receive special dial tone.
2.
Dial the third party; receive ringback tone.
3.
At this point, the user can either wait and announce the call or hang up before the transfer is completed.
The LCD display for an announced transfer will be:
The LCD for an unannounced transfer will be:
When the telephone number of the transferring/transferred station exceeds 8 digits, the last 8 digits are
Note:
displayed. However, a maximum of 16 digit transferred telephone numbers can be displayed on the middle
line of the LCD, depending on system data.
To set the Camp-on by Station function to the busy station
• Manual Operation
1.
While connected with the first party, press the TRANSFER key; receive special dial tone. The calling
trunk party hears music on hold. The D
2.
Dial the third party, and the third party is busy; receive busy tone. The LCD of the operating station
displays:
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Call Transfer - All Calls - D
Call Transfer - All Calls - D
term
user to transfer incoming or outgoing calls without Attendant assistance.
Transferred Party
TRANSFER
(Time Display)
Transferring Party
TRANSFER XXXX
(Time Display)
TRANSFER
(Time Display)
BUSY
(Time Display)
term
XXXX
Transferred Party
XXXX
term
LCD of the mediate party (operating station) displays:
The extension number of the third party
XXXX
C-11D
term
Page 165
Advertisement
Table of Contents
