NEC NEAX2400 IPX Programming Manual page 832

Feature programming manual
Hide thumbs Also See for NEAX2400 IPX:
Table of Contents

Advertisement

Interactions (cont'd)
TC values for Indexes 142, 143, 144
TC 0 = -
1 = -
2 = -
3 = 2 seconds
4 = 30 seconds
7 = 8 seconds.
TC values for Indexes 135
TC 0 = -
1 = 64 msec.
TC values for Indexes 149
TC 0 = -
1 = -
2 = -
3 = 2 seconds
4 = 30 seconds.
TC values for Indexes 145
TC 0 = -
1 = 2 seconds.
Programming
ASYD - System Data 1. All VARIABLE TIMING PARAMETERS are located between Indexes 128
and 159, with the exception of Paging.
AUTOMATIC RECALL [A-8]
System Data 1, Index 145. Assign "9F" (in hex) for 30 seconds.
CALL FORWARDING-DON'T ANSWER [C-3]
System Data 1, Index 141. Assign 35H for 10 seconds. This timer works in conjunction with Index
139, which is assigned "3F" (in hex) for 30 seconds. After ringing for 10 seconds at the first station
and 30 seconds at the CALL FORWARDING destination station, the call returns to the Attendant
Console. CALL TRANSFER-ALL CALLS [C-11].
System Data 1, Index 140. Assign 3FH for 30 seconds.
PERIODIC TIME INDICATION TONE [P-11]
System Data 1, Indexes 137 and 138. Timer Class of data "4" for 30 seconds is available for both
timers. Index 137 sets when the first tone will be heard. Assign "46" (in hex) for 3 minutes. Index 138
sets the interval between the first tone and all subsequent tones. Assign "46" (in hex) for 3 minutes.
This assignment works with ARTD, CDN 29:TELP.
PAGING TRANSFER [P-10]
System Data 1, Index 74, Bits 0-3. Set the Paging No-Answer timer for Recall on Transfer. Set to "00"
(in hex) for 30 seconds. (0-F + 1) x 30 = Recall Value RADIO PAGING [R-16].
System Data 1, Index 73, Bit 4. Not used. System Data 1, Index 73, Bit 5. The Recall timer is doubled,
as set in System Data 1, Index 74, Bits 4-7. After the first half of the timer, recall of the radio page
occurs via the PBX. The system grabs a register and the Radio Page trunk and resends the two or three-
digit answer code. Is this operation wanted? 0/1: Yes/No.
System Data 1, Index 74, Bits 4-7. Recall timer for radio page. (N + 1) x 30 = Time Out, where N =
value set in hex in Bits 4-7. If the paged party doesn't respond, the page is cancelled.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Variable Timing Parameters
V-1
Page 789

Advertisement

Table of Contents
loading

Table of Contents