Table of Contents
Advertisement
Service Conditions (cont'd)
b.) When stations belonging to different nodes are assigned to a Circular Hunt Group, the station
hunt is not activated in assigned order if the stations are not assigned in continuous order within a
node. First, the call is shifted to the station belonging to the node of the called station even though
it is not in consecutive order (in the node, station hunting is activated in assigned order). After all
the stations in the node are hunted, the station hunt is shifted to the next assigned station and the
stations in the node are hunted in assigned order. The station hunt continues this way until the idle
station is found. See the following figure.
Example:
•
Station No. 1 is the called station. When the call encounters busy, the call is hunted in order of No. 3, No. 4 (hunted
in the node of the called station) to No. 2, No. 6, No. 8 (hunted in the node C that accommodates the next station in
assigned order) to No. 5, No. 7.
Node A
No.1
No.3
(Called station)
Note:
Numbers under the stations show the assigned order.
23.
When all the stations in a Circular Hunt Group are busy:
a.) If a call is terminated to a group that has no Secretarial Station, the caller will hear busy tone.
b.) If a call is directed to a group that has a Secretarial Station, the call will be shifted to the
Secretarial Station. However, the caller will hear busy tone when the Secretarial Station is also
busy.
24.
The incoming call terminated through FCCS link to the Station Hunt group, which is programmed by the
Physical Station Number, is not hunted.
25.
When a Physical Station Number and telephone number assigned to a Circular Hunt station are identical,
priority is attached to STATION HUNTING - CIRCULAR via FCCS.
26.
When using this feature within an FCCS network, when CALL FORWARDING - ALL CALLS [C-5] has
been set to a Circular Hunt station, a call directed to the station is forwarded to the designated station.
27.
When using this feature within an FCCS network, when a call to a Circular Hunt station is forwarded by
CALL FORWARDING - BUSY LINE [C-2] and the forwarded party (also a member of another hunting
group) is also busy, the resultant hunt target can be designated from the forwarding side group or the
forwarded side group. This can be specified by the ASYDN command.
28.
When using this feature within an FCCS network, calling back for CALL BACK [C-1] or CALL HOLD
[C-6] is not hunted.
29.
When using this feature within an FCCS network, Hot Line station (calling party) cannot be assigned to a
Circular Hunt station activated via FCCS link.
30.
A Station Hunting - Circular group may accommodate members from four different Fusion Point Codes.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Station Hunting - Circular
Node B
No.4
No.5
No.7
No.2
S-7
Node C
No.6
No.8
Page 653
Advertisement
Table of Contents
