Table of Contents
Advertisement
Programming (cont'd)
STEP 4:
ASFC - Assigns Executive Right-of-Way Calling (SFI = 3) to the SFC of the station setting Executive
Right-of-Way. Also assigns Executive Right-of-Way-Called (SFI = 4) and Attendant Camp-On (SFI =
11) to the SFC of the station to which Executive Right-of-Way is set. At the remote node, assign SFI 3,
4 and 11 to SFC 0.
STEP 5:
ATRK - Assigns the trunk for 3-Way Calling (assigned at RT = 909).
STEP 6:
MBTK - Make the above trunk idle.
STEP 7:
AKYD - Assigns Override key on a D
WAY [3].
STEP 8:
ADSL - Assign Override key; Assign SN=3 (Called Station Busy) and FKY=3 (Executive Right-of-
Way).
This command is used for assigning a function to each soft key.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Executive Right-of-Way - CCIS
term
, if necessary Type:Function:EXECUTIVE RIGHT-OF-
E-8
Page 913
Advertisement
Table of Contents
