NEC NEAX2400 IPX Programming Manual page 708

Interactions (cont'd)
c.) When hunting occurs, if Station A is the only idle station in the hunting pattern, a busy tone is
returned to the calling party.
d.) During a Call Forward-Override call from Station B to Station A, if station A is idle, Station A
will ring. If Station A is busy, the call will not hunt.
e.) If the Pilot sets CALL FORWARDING-ALL CALLS [C-5] to Station B: During a Call Forward-
Override call from Station B to the Pilot, if the Pilot station is idle, the Pilot will ring. If the Pilot
station is busy, the call will hunt.
Call to Station A will
forward to Station B
Call to Pilot
Call to Pilot bypasses
Station A, rings Station in
Hunt Group
Busy Station
Idle Station
Ringing Station
Phantom Station
5. CALL FORWARDING-BUSY LINE/DON'T ANSWER [C-2, 3]: If Station A is in a STATION
HUNTING-TERMINAL group and not the Pilot station, it will activate CALL FORWARDING-BUSY
LINE/DON'T ANSWER to Station B:
a.) Any call to Station A will respond to CALL FORWARDING-DON'T ANSWER [C-3].
b.) A direct call to Station A will respond to CALL FORWARDING-BUSY LINE [C-2].
c.) A call to the STATION HUNTING-TERMINAL group will bypass Station A if that station is
both busy and has set CALL FORWARDING-BUSY LINE [C-2]. The next station in the group
will ring.
d.) A CALL FORWARDING-OVERRIDE call from Station B to Station A will not hunt if Station A
is busy.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Station Hunting - Terminal
Station B
Station A, Call Forward-
All to Station B, is idle
Pilot
Station A
Phantom
Other Hunt
Group
Available
Secretary
S-9
Hunt
Ringing
Page 665