Table of Contents
Advertisement
D-75
Programming
STEP 1:
ASYD - System 1, Index 72, Bit 6.
Distinctive ringing only for DIT and DID calls.
System 3, Index 0: Assign the timer value of the ringer used at the time of local line incoming. (ringer
pattern 0).
System 3, Index 1: Assign the timer values of the ringer used at the time of station call. (ringer pattern
1).
System 3, Index 3, Bit 0: 2 burst (0.4 sec-ON, 0.2 sec-OFF, 0.4 sec-ON) ON-Timer for Ringer Pattern
0. 0/1 = Not Required/Required.
System 3, Index 3, Bit 1: 2 burst (0.4 sec-ON, 0.2 sec-OFF, 0.4 sec-ON) ON-Timer for Ringer Pattern
1 0/1 = Not Required/Required.
STEP 2:
ASFC - Allow Burst Ringing (SFI = 48) to the SFC of the incoming station.
STEP 3:
ARTD - Assign CDN 12:DR = 1 to the route class of the incoming trunk in the CCIS Route.
Page 902
Distinctive Ringing - CCIS
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
