Table of Contents
Advertisement
Programming (cont'd)
DC:
914798
OGRT: 1
DC:
718623
DC:
718567
This allows just these office codes within these particular Area Codes. All other area codes beginning
with "7" or "9" are also restricted. At this point, if allowing Area code 714 is desired, assign AARP as
follows:
AARP Command-
OGRT: 1
DC:
714
Example 4 - RSC 4 Assignment
(Allow local plus all Area Codes except 808, 213, 408, and 714)
ATDP Command-
TDM/OG:
DAY/NIGHT: D (Day)
OGRT:
DC:
Repeat these same assignments for Digit Codes "93" through "99" to allow all local office codes.
TDM/OG:
DAY/NIGHT: D (Day)
OGRT:
DC:
NND:
DC:
DC:
\\\
DC:
This tells the system to check AARP tables for all restrictions for Area Codes.
AARP Command-
OGRT:
1
OGRT:
1
OGRT:
1
OGRT:
1
OGRT:
1
*This assignment restricts the Area Codes listed.
**DC: 000000" indicates all other Destination Codes except those already assigned Destination
Codes.
RES:
Restriction Data: (0/1)
0: Not assigned Area Codes are restricted
1: Not assigned Area Codes are allowed.
The above assignment allows all other dialing patterns (Area Codes) except 808, 213, 408 and 714.
Example 5 - RSC 5 Assignment
(Allow local plus all Area Codes, but restricted from office code 976 within each Area Code)
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Toll Restriction - 3/6-Digit
RES:
1 (Connection is Allowed)
RSC:
3
RES:
1 (Connection is Allowed)
RES:
1 (Connection is Allowed)
RSC:
3
FLAG: 1
RES:
1 (Connection is Allowed)
O (Outgoing Connection)
1
RSC:
4
92
TDI:
1 (Connection is Allowed)
O (Outgoing Connection)
1
RSC:
4
912
TDI:
2 (Go to AARP Command)
3
913
TDI:
2 (Go to AARP Command)
914
TDI:
2 (Go to AARP Command)
(Through)
919
TDI:
2 (Go to AARP Command)
RSC:
4
FLAG: 1
RSC:
4
FLAG: 1
RSC:
4
FLAG: 1
RSC:
4
FLAG: 1
RSC:
4
FLAG: 2
FLAG:
2
DC:
808
DC:
213
DC:
408
DC:
714
DC:
000000
RES:
0*
RES:
0*
RES:
0*
RES:
0*
RES:
1**
T-7
Page 753
Advertisement
Table of Contents
