Table of Contents
Advertisement
O-2D
O-2D
General Description
term
This service allows a D
Operating Procedure
Without LEAST COST ROUTING - 3/6-DIGIT [L-5]
1.
Dial the trunk access code; receive busy tone.
2.
Press the CALL BACK key, receive service set tone. The LCD displays:
3.
Replace the handset.
4.
When the trunk becomes idle, the station will be rung.
With LEAST COST ROUTING - 3/6-DIGIT [L-5]
1.
Dial the trunk access code; receive PBX dial tone.
2.
Dial the desired number; receive busy tone. The LCD displays:
3.
Press the CALL BACK key; receive service set tone. The LCD displays:
4.
Replace the handset.
5.
When the trunk becomes idle, the station will be rung. Once connected to the trunk, the system
automatically redials the number.
Service Conditions
1.
When an OUTGOING TRUNK becomes available, the user's station will ring for 30 seconds. If the user
does not answer within that time, the station will be automatically dropped from queue.
2.
When this feature is used in conjunction with SPEED CALLING [S-3, 21, 23], or LEAST COST
ROUTING - 3/6-DIGIT [L-5] where a sender is involved, the sender will automatically dial out the called
number when the handset is lifted.
3.
To cancel the OUTGOING TRUNK QUEUING from a D
The LCD displays:
The user will hear service set tone.
Page 556
Outgoing Trunk Queuing - D
Outgoing Trunk Queuing - D
user, upon encountering a trunk busy signal, to enter a first-in, first-out queue.
OG-Q SET
(Time Display)
BUSY
(Time Display)
OG-Q SET
(Time Display)
OGQ CANCEL
(Time Display)
term
term
Called Party
XXXXXX
term
, go off-hook and press CALL BACK key.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
