Table of Contents
Advertisement
B-8
Service Conditions (cont'd)
5.
This feature is not restricted by CLASS OF SERVICE - INDIVIDUAL [C-15] on either the boss or
secretary stations.
6.
BOSS-SECRETARY MW LAMP CONTROL indication is cleared by system initialization or a Local
Processor initialization.
7.
MW control is provided to stations using the D
a.) one station is talking with another station.
b.) a special purpose button is pushed after a call is established.
c.) the station is calling another station in the network.
d.) CALL WAITING [C-12, 13] is being set up.
e.) the station is using VOICE CALL - D
f.) the ATTENDANT CONSOLE [A-3] indication shows an incoming call.
8.
MW for one station of the network can be controlled from the ATTENDANT CONSOLE [A-3] and any
other station at the same time. The controlled station cannot identify the controlling party.
9.
The MW indication on the boss' station appears as follows:
TYPE OF STATION SET
10.
The LCD on the secretary's station displays the following messages:
STATUS OF BOSS' STATION
MESSAGE
WAITING
(already set)
MESSAGE
WAITING
(not set)
11.
MW cannot be activated on a virtual line. The LCD displays MW REST, and the reorder tone is heard
when activation from a virtual line is attempted.
Note:
The reorder tone is not heard while talking to the calling party.
12.
This feature can control the Call Indicator Lamp or MW display from the sub-line during:
a.) conversation with the calling party.
b.) special code dialing after replacing the handset or pressing the SPEAKER key.
c.) ringback tone for station calling.
Page 92
Boss - Secretary - Message Waiting Lamp Control
term
D
Series E
SETTING
CANCELLING
SETTING
term
sub-line when:
term
[V-2D].
MESSAGE WAITING INDICATION
MW
TERM
LCD D
SERIES E
MW
(Time Display)
MW
(Time Display)
MW
(Time Display)
NEAX2400 IPX Feature Programming Manual
(Time Display)
TYPE OF TONE
BUSY
CANCEL
Call Indicator is
SET
NDA-24297, Issue 1
ON
Advertisement
Table of Contents
