Table of Contents
Advertisement
Programming (cont'd)
27: Eight Conference Equipment
RSC:
Route Restriction Class (0-15)
For assignment of RSC, ARSC command.
SFC:
Service Feature Class (0-15)
For assignment of SFC, ASFC command.
STEP 5:
AISA - Program the tenant, station, type of station, and the number of SPEED CALLING blocks to be
assigned to the Primary station. One MY Line station of each GROUP CALLING group is assigned as
the Primary. The Primary then assigns all the stations MY Line numbers, which will have abbreviated
codes.
TN:
STN:
MST/SLV: Primary/Secondary
BLOCK:
STN:
STEP 6:
AKYD - Assign the virtual circuit to D
number of the virtual circuit. This key will be the GROUP CALLING key.
STEP 7:
AISD - This command can also be used to assign Individual Speed Calling Data.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Intercom Calling
Tenant Number
Station Number
M: Primary Station
S:
Secondary Station
Number of Blocks
When assigning Secondary Station, assign the Primary Station number.
term
key. Assign FYI = 2, Multi-line key, and assign the station
I-9
Page 401
Advertisement
Table of Contents
