Call Return - NEC NEAX2400 IPX Programming Manual

C-151
C-151
General Description
This feature allows the D
the station. The following two types of saving features are available:
• Automatic Saving: The received calling number/number of the station is automatically saved when the
• Manual Saving:
Operating Procedure
Automatic Saving
1. Saving Calling Number
a.) A call is terminated to an analog station or My Line of the D
b.) The received calling number is automatically saved. When the station is the D
Return key, the received calling number is displayed on the LCD and the Call Return key lights
red.
Note: The maximum number of calling numbers stored for the D
term
D :
Analog station:
2. Displaying Stored Calling Number (for the D
a.) While in idle state, press the Call Return key.
b.) The saved calling number is displayed for 5 seconds. When multiple numbers are stored, the
display changes each time the Call Return key is pressed. The number is displayed from the latest
to the oldest. When the indication reaches the oldest number, the latest number appears again by
pressing the Call Return key.
3. Call Origination
• When using the Call Return key on the D
a.) Display the desired number by pressing the Call Return key. (Refer to (2).)
b.) Lift the handset and receive dial tone.
c.) Press the Call Return key. The displayed number is dialed.
Note: The dialed number is automatically deleted. When all the stored numbers are deleted, the Call Return key
goes off.
• When using Access Code
a.) Lift the handset and receive dial tone.
b.) Dial the access code for Call Return. The last number saved is dialed.
Note: The dialed number is not deleted.
4. Deleting Stored Number (for the D
a.) Display the desired number by pressing the Call Return key. (Refer to (2).)
b.) Press the "*" or "#" key (according to system data assignment). The displayed number is deleted
and CANCEL is displayed on the D
When all the stored numbers are deleted, the Call Return key goes off.
Note 1:
Note 2: Note that the delete key ("*" or "#") is effective while the calling number is displayed for 5 seconds.
Page 252
term
or an analog station to save the received calling number and the received number of
station rings. The stored number can be dialed by pressing the feature key or dialing the
access code.
The received calling number is manually saved by the D
The stored number can be dialed by pressing the feature key.
3
1
term
with the Call Return key)

Call Return

Call Return
term
/analog station is as follows:
term
with the Call Return key)
term
term
LCD.
term
user while in conversation.
term
.
term
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
with the Call