Table of Contents
Advertisement
Interactions
A Voice Call cannot be sent to a single-line station.
Programming
Operating with the feature key
STEP 1:
AKYD - Assign the station according to the following parameters:
TN:
1
STN:
Station Number
TP:
Type of D
RING:
0: No Ringing
1: Ringing All Lines
2: Ringing on Prime Line Only
3: Flexible Ring Assignment, enables RG parameter.
KYN: Key Number (1-40)
KYI:
Service Index
0: Key Not Used
1: Feature Key
2: Multi-line Key
KD:
Not assigned for Feature Key
FKY: Feature Key Number=14 (VOICE CALL)
STEP 2:
ADSL - Assign VOICE key; Assign SN=2 (Originating; RBT Connection) and FKY=14 (Voice Call).
This command is used for assigning a function to each soft key.
Operating with the access code
STEP 1:
ASYD - System Data 1, Index 17, Bit 0. Hooking (H) service for single-line set. This is used for the
MESSAGE REMINDER [M-19] and VOICE CALL features of a single-line set.
STEP 2:
ANPD - Reserve a number level for feature access. Assign Connection Indexes, CI = N, H, B; Normal,
Hooking, and Busy (applicable to any feature assigned to this level). Assign NND in accordance with
a predetermined numbering plan.
STEP 3:
ASPA - Assign an access code to VOICE CALL, SRV = SSCA, SIDA = 41. Connection Status, CI =
H, Hooking.
STEP 4:
ASFC - Assign a Service Feature Class that allows SFI = 52 to single-line stations which will be
allowed to initiate Voice Calls.
Assign a Service Feature Class allowing SFI = 93 to D
CALL.
FCCS Programming
No unique programming is required for the FCCS network.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Voice Call - D
term
0/1:
term
term
stations that do not allow access by VOICE
V-2D
Page 793
Advertisement
Table of Contents
