Table of Contents
Advertisement
M-40
Service Conditions (cont'd)
13.
The following services are activated within one node, therefore, the number of times for these services are
independent. The maximum number of times for activating this feature is the same as previous software
releases:
MULTIPLE CALL FORWARDING - ALL CALLS [M-44]:
MULTIPLE CALL FORWARDING - BUSY LINE [M-24]:
MULTIPLE CALL FORWARDING - DON'T ANSWER [M-25]: unlimited
14.
The following are detailed examples of Call Forwarding - CCIS activation. These examples are activated
under the conditions below:
• The maximum number of times to activate the service is three (programmed in Office A and Office B).
• The last call forwarding is operated by Call Forwarding - All Calls/Don't Answer service.
• Any kind of D
• Any kind of Call Forwarding service (All Calls/Busy Line/Don't Answer) is available to be set at the
calling/intermediate terminal.
a.) The service is restricted because the terminating Office B is unavailable for enhanced Call
Forwarding - CCIS service.
Page 954
Multiple Call Forwarding - All Calls - CCIS
term
, ISDN terminal, PHS, etc. is available to be used for the calling/intermediate party.
The node that decides number of times for activating service.
The node that is available for the enhanced Call Forwarding - CCIS services.
The node that is unavailable for the enhanced Call Forwarding - CCIS services.
Office A
CCIS
1st C.F.
Office B
CCIS
2nd C.F.
UNAVAILABLE
NEAX2400 IPX Feature Programming Manual
5 times
5 times
Office C
NDA-24297, Issue 1
Advertisement
Table of Contents
