Table of Contents
Advertisement
S-26D
Service Conditions (cont'd)
10.
FLASH ENTRY and VOICE CALL features may be combined on a SPEED CALLING-ONE TOUCH
key to activate an automatic voice-announce transfer. To program, press the SPEED CALLING-ONE
TOUCH key, press the RECALL key, dial the number, press the TRANSFER key, then press the SPEED
CALLING-ONE TOUCH key.
11.
A PAGE CHANGEOVER key must be assigned to a programmable Line/Feature key to activate the
second page of SPEED CALLING-ONE TOUCH numbers.
Interactions
1.
The PAGE CHANGEOVER key is useful for changing the page of feature keys programmed as SPEED
CALLING - ONE TOUCH (AKYD, FKY = 49) or the feature key programmed as Call Forwarding/Split
Call Forwarding.
2.
The Page Changeover function can be activated from any condition (idle, busy, conference, etc.).
3.
When assigning SPEED CALLING-ONE TOUCH numbers to D
assigned to a particular SPEED CALLING-ONE TOUCH button, the display will not change when that
particular button is pressed for programming (it will appear that nothing has happened; the middle portion
of the LCD display will continue to display the date and time). Once a number is entered, it will be
displayed on the upper portion of the LCD display.
4.
The same SPEED CALLING-ONE TOUCH buttons are used for Page 0 and Page 1 numbers. The PAGE
CHANGE-OVER key determines which page is selected.
5.
There is no deletion of SPEED CALLING-ONE TOUCH numbers. Previously assigned numbers can only
be overwritten.
6.
SPEED CALLING-ONE TOUCH may be used to store FORCED ACCOUNT CODES [F-7] and
AUTHORIZATION CODES [A-20]. Other forms of Speed Calling may not be used for FORCED
ACCOUNT CODES [F-7] and AUTHORIZATION CODES [A-20].
7.
When SPEED CALLING-ONE TOUCH is used on a programmable Line/Feature key, only eight digits
may be stored.
8.
When using a D
consecutive order. A maximum of 16 one touch keys per LEN are allowable.
9.
No more than three pauses can be entered in a row.
Programming
No programming is required for the 12 existing SPEED CALLING-ONE TOUCH keys for the D
In order to activate the second page of SPEED CALLING-ONE TOUCH numbers, the following must
be programmed:
AKYD - Assign a PAGE CHANGEOVER key to a programmable Line/Feature key on the D
Assign Type:Function:PAGE [55].
If a SPEED CALLING-ONE TOUCH button is to be used on a programmable Line/Feature key,
complete the following:
Assign Type:Function:SPEED CALL-ONE TOUCH [49].
FCCS Programming
No unique programming is required for the FCCS network.
Page 704
Speed Calling - One Touch - D
term
Series E, SPEED CALLING - ONE TOUCH can be programmed to any keys in
term
term
, if a previous number was not
NEAX2400 IPX Feature Programming Manual
term
.
term
.
NDA-24297, Issue 1
Advertisement
Table of Contents
