Table of Contents
Advertisement
C-30
Programming (cont'd)
STEP 2:
ANPD - Reserve a number level for feature access. Assign for Normal (N), Hooking (H), and Busy
(B).
STEP 3:
ASPA - Assign an access code to CALL PICKUP-DIRECT, SRV = SSC (Service Code), SID = 35 for
Connection Status Index (CI) of Normal (N).
STEP 4:
ASFC - Assign a Service Feature Class that allows SFI 29 to the stations.
FCCS Programming
This data setting describes only the additional or replacement commands used to activate FCCS
services. When used as an FCCS feature, these commands replace the non-network commands (for
example, AAED is replaced by AAEDN). Note that the data setting for FCCS service varies depending
on the node.
STEP 1:
ANPDL - Reserve a number level for feature access. Assign for Normal (N), Hooking (H), and Busy
(B).
STEP 2:
ASPAL - Assign an access code to CALL PICKUP-DIRECT, SRV = SSC (Service Code), SID = 35
for Connection Status Index (CI) of Normal (N).
Note:
When using ASYDL or ASYDN to program an FCCS feature, the basic programming of ASYD is required
in addition to ASYDL or ASYDN.
Page 212
Call Pickup - Direct
Note
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
