Attendant Override - NEC NEAX2400 IPX Programming Manual

Feature programming manual
Hide thumbs Also See for NEAX2400 IPX:
Table of Contents

Advertisement

A-7
A-7
General Description
This feature permits an Attendant to enter a busy trunk connection within the NEAX2400 IPX, via the Attendant
Console [A-3]. Upon activation, a warning tone will be heard by the connected parties, after which they will be
connected with the Attendant in a three-way bridge.
Operating Procedure
1.
Press the TKSL key.
2.
Dial the desired trunk route (2 or 3 digits) and the identification numbers (3 digits).
3.
Upon receiving busy tone, press the Busy Verification (BV) key.
4.
A two-burst tone is sent to the connected parties.
5.
The Attendant can now monitor or join the connection.
6.
Press the RELEASE key to disengage.
Service Conditions
1.
This feature may be utilized during trunk-to-trunk calls (COT, FX, WATS, CCSA, TIE Lines).
2.
This feature cannot be activated when the connected station/trunk is:
a.) dialing
b.) connected to a three-way connection.
c.) when a PRIVACY [P-14D, P-15D] feature is activated.
d.) connected to a route programmed for Line/Trunk, Privacy, CDN 44:PRV.
e.) listening to a tone (Dial, Reorder, Service Set, Busy, Ringback).
f.) protected by DATA LINE SECURITY [D-12].
g.) being connected to an Attendant loop.
h.) activating any conflicting feature, such as:
BUSY VERIFICATION
BOSS- SECRETARY OVERRIDE
CALL HOLD
CALL TRANSFER
CALL WAITING - TERMINATING
CONSULTATION HOLD - ALL CALLS
DATA LINE SECURITY
DATA PRIVACY ON DEMAND
DIAL ACCESS TO ATTENDANT
EXECUTIVE RIGHT-OF-WAY
EXCLUSIVE HOLD - D
NON-EXCLUSIVE HOLD - D
OFF-HOOK QUEUING
OUTGOING TRUNK QUEUING
PRIVACY - D
PRIVACY RELEASE
THREE-WAY CALLING
VOICE CALL
In each of the above instances, the Attendant will receive reorder tone.
3.
ATTENDANT OVERRIDE and ATTENDANT LOCKOUT [A-5] are mutually exclusive features.
Page 12

Attendant Override

Attendant Override
term
term
term
[B-3]
[B-5]
[C-6, C-6D]
[C-10, C-11, C-11D]
[C-12]
[C-17, C-17D]
[D-12]
[D-17]
[D-2, D-71]
[E-1, E-1D]
[E-4D]
[N-7D]
[O-7]
[O-2, O-2D]
[P-14D]
[P-18]
[T-2, T-2D]
[V-2]
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1

Advertisement

Table of Contents
loading

Table of Contents