Table of Contents
Advertisement
N-8D
General Description
This service feature allows the line function buttons on the D
feature keys. These assignments are done on a per-station basis.
Operating Procedure
Key designations are assigned via the Maintenance Administration Terminal (MAT) [M-18].
Service Conditions
Programming one feature to more than one key will not provide enhanced service. For example, two MSG keys will
term
not provide a D
set with eight message memories. See MESSAGE REMINDER - D
Programming
STEP 1:
ASDT - A LEN equipped with a D
Telephone Equipment Class (TEC) of 12.
STEP 2:
AKYD - Assign a MY Line, a Prime Line, and various sublines to the D
TN:
STN:
TP:
RING: Assign ringing to the entire phone
PL TN STN: Prime Line Tenant and Station Number
KYN:
KYI:
KD:
TN STN:
RG:
Any combination of available system extension numbers may be assigned to the keys of the D
instruments. There are no restrictions on order of multi-line appearance. Line appearances may be
arranged in any fashion, provided they are located within the same Module Group.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Non-square Line Assignment - D
Non-square Line Assignment - D
1
Station Number
term
Type of D
0/1:
0: No Ringing
1: Ringing All Lines
2: Ringing on Prime Line Only
3: Flexible Ring Assignment enables RG parameter
Key Number (1-40)
Service Index
0: Key Not Used
1: Feature Key
2: Multi-line Key
Not assigned for Feature Key
Tenant Number and Station Number of Multi-line
Ringing Assignment per Multi-line Appearance
0: No Ringing
1: Ringing in Day Mode Only
2: Ringing in Night Mode Only
3: Ringing in Day and Night Mode
term
set to be freely assigned as line keys or as service
term
Circuit Board must be assigned a station number and a
term
term
term
[M-19D].
term
s.
N-8D
term
Page 547
Advertisement
Table of Contents
