Table of Contents
Advertisement
A-126
General Description
This feature allows an office receiving ANI information from Central Office through an analog trunk (Caller ID or
MF) to extend to another office through CCIS when the tandem connection is established.
Operating Procedure
No manual operation is required.
Service Conditions
1.
The maximum digits of ANI information sent to another office through CCIS are 16.
2.
When the tandem connection is established through CCIS, the maximum digits of ANI information which
the connected office may output to the SMDR port or MCI are 16.
3.
In regard to other conditions, refer to the Service Conditions of CALL TRANSFER - ALL CALLS - CCIS
[C-50].
Programming
Also see TRUNK LINE APPEARANCE
term
a D
line/feature key
STEP 1:
ASYD - System Data 1, Index 241, Bit 6. 0/1 = When the length of Caller ID exceeds the limit, only
the former/latter part of data appears on the LCD.
System Data 1, Index 390, Bit 0. Caller ID display pattern on the LCD. 0/1 = Calling Number/Calling
Name has priority.
System Data 1, Index 390, Bit 2. when using D
displaying Caller ID. 0/1 = Out/In service.
When Calling Number is output to SMDR, the following expanded format is used.
S
O
!
T
X
System Data 1, Index 288, Bit 5. Expanded SMDR Output for SMDR A Apparatus. 0/1 = Out/In
Service.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
ANI-CCIS (16 Digit)
ANI-CCIS (16 Digit)
1
2
96
K
H
OFFICE CODE
/
STN. NO., RT TRK,
I
CALLED PARTY
/
(FOR CCIS)
J
H = Origination
I = Termination
J = Station-to-Station
[T-23]
for information on how to accommodate C.O. line on
term
2-line LCD, the lower LCD can be used for
104
AUTH
CODE
A = ANI Information
Identifier:
0 = Output is not available
1 = Displayed
2 = Display denied
3 = Service is not available
4 = Origination from public pay phone
Note: For 0, 2 and 3, the ANI number is not output.
129 130
131
162
A
ANI
Z
E
NO.
T
X
Z = End of SMDR
Information
Page 813
A-126
Advertisement
Table of Contents
