Table of Contents
Advertisement
L-29
General Description
When an LDN incoming call arrives from a CCIS line or other outside line while the System is in Night Mode, this
service feature transfers the call to a transfer destination outside line, including CCIS lines, assigned for that LDN.
Operating Procedure
1.
Attendants 1 & 2 in Node A set into Night mode using the NITE key; the Night lamp illuminates indicating
that Night mode has been set for handling incoming calls.
2.
Station (C) dials the LDN number of Attendant Console #1. Station (C) is automatically connected to night
connection Station (B), preset for Attendant Console #1; Station (C) receives ringback tone, and Station
(B) is rung.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
LDN Night Connection - CCIS
LDN Night Connection - CCIS
NIGHT MODE
ATT1
ATT2
STN (a)
[Node A]
NIGHT MODE
ATT1
ATT2
STN (a)
[Node A]
STN (c)
[Node C]
CCIS
[Node B]
RBT
STN (c)
[Node C]
RG
RBT
STN (b)
CCIS
[Node B]
STN (b)
L-29
Page 929
Advertisement
Table of Contents
