Table of Contents
Advertisement
M-24
Operating Procedure (cont'd)
4.
Dial the originating telephone number.
5.
Dial the desired target telephone number; receive service set tone.
To cancel from the ATTENDANT CONSOLE [A-3]
1.
Press an idle loop key.
2.
Dial the CALL FORWARDING - BUSY LINE [C-2] cancel code; receive special dial tone.
3.
Dial the TENANT [T-12] number (2 or 3 digits).
4.
Dial the originating telephone number; receive service set tone.
Service Conditions
1.
If the called station is busy and MULTIPLE CALL FORWARDING - BUSY LINE [M-24] is set at the
called station, the call is forwarded to the designated station.
2.
A call cannot be forwarded more than five times, even if the fifth station has CALL FORWARDING -
BUSY LINE set.
3.
A call cannot be forwarded to the originating station.
4.
If the call is forwarded back to the originally called station, or a station that has already been forwarded
to, call forwarding will end at that station.
5.
CALL FORWARDING - BUSY LINE [C-2] and CALL FORWARDING - ALL CALLS [C-5] combined:
a.) Any combination of CALL FORWARDING - BUSY LINE [C-2] and CALL FORWARDING -
ALL CALLS [C-5] may be made, up to a total of five forwards.
b.) If the fifth forwarding destination is busy, the caller receives busy tone, and the call will not
forward again.
c.) If a forward destination is the calling station, the calling station will receive busy tone.
d.) If a forwarding destination is the originally called station, and if the originally called station
forwarded the call with CALL FORWARDING - ALL CALLS [C-5], the ultimate destination is
the originally called station's CALL FORWARDING - ALL CALLS [C-5] destination.
Call
S
Page 492
Multiple Call Forwarding - Busy Line
CF-A, 1st time
A
CF-A, final time
CF-A
B
CF-A
D
NEAX2400 IPX Feature Programming Manual
CF-B
NDA-24297, Issue 1
Advertisement
Table of Contents
