Table of Contents
Advertisement
F-4D
F-4D
General Description
term
This feature allows a D
term
TOUCH-D
[S-26D] number.
Operating Procedure
To add a flash to a stored SPEED CALLING-ONE TOUCH-D
1.
Stay on-hook.
2.
Press the Feature key and the SPEED CALLING-ONE TOUCH-D
either be blank or a display of previously stored digits.
3.
Press RECALL key as first digit; a switch hook flash is entered into the memory and the LCD displays:
4.
If a feature access code is to follow the Flash Entry, dial the desired digits.
5.
Press the Feature key; the LCD displays:
To add a flash to a stored SPEED CALLING - ONE TOUCH [S-32D] number to a D
1.
Stay on-hook.
2.
Press the feature key and the SPEED CALLING - ONE TOUCH [S-32D] key; LCD will either be blank
or display previously stored digits.
3.
Press the RECALL key as the first digit; a switch hook flash is entered into the memory and the LCD
displays:
4.
If a feature access code is to follow the FLASH ENTRY, dial the desired digits.
5.
Press the feature key; the LCD displays:
Service Conditions
1.
A FLASH ENTRY may be entered only as a first digit. For example:
a.) Call Transfer - "!+Telephone Number"
b.) Busy Service - "+Calling Waiting - Originating access code" "!+Executive Right-of-Way access
code"
c.) Call Hold - "!+Call Hold access code"
2.
A FLASH ENTRY, stored as a flash, may be used only once, unless digits are dialed between use.
Page 354
Flash Entry - D
Flash Entry - D
user to insert a switch hook flash as the first digit in a stored SPEED CALLING-ONE
(Time Display)
SPEED SET
(Time Display)
(Time Display)
SPEED SET
(Time Display)
term
term
term
[S-26D] number to a D
term
[S-26D] key; the LCD display will
!
term
!
NEAX2400 IPX Feature Programming Manual
term
NDA-24297, Issue 1
Advertisement
Table of Contents
