Table of Contents
Advertisement
C-2D
Service Conditions (cont'd)
b.) When the calling party is the attendant console or the night station, and the destination of the
CALL FORWARDING - BUSY LINE service is also the attendant console or the night station.
26.
SPLIT CALL FORWARDING [S-99] is available only when the calling party is the station or the CCIS
line.
27.
The OAI monitor number and the ACD pilot number cannot be assigned as the Call Forwarding target
telephone number except when called from a station or Tie Line trunk.
28.
Telephone number must be set to the call forwarding destination.
29.
This feature is not available for stations having a telephone number of seven digits or more.
30.
A call can be forwarded to an Attendant Console in the remote node via FCCS link.
Attendant
Console B
31.
When a call is forwarded through FCCS link, the numbering plan of the originally called station must be
identical with that of the forwarded Attendant Console.
Interactions
1.
If the same access code is used for CALL FORWARDING - BUSY LINE - D
FORWARDING - DON'T ANSWER [C-3], only one key needs to be assigned in AKYD.
2.
An ATTENDANT CAMP-ON [A-1] call is terminated at Station A, and Station A has CALL
FORWARDING - BUSY LINE - D
HUNTING [S-7, 8, 9] Group, the call will Camp-On at Station A and will not Hunt.
3.
When CALL WAITING [C-12, 31], ATTENDANT CAMP-ON [A-1], and CALL BACK [C-1] is
directed toward Station A, which has call forwarding set to Station B, and Station B is busy, Station A will
receive Call Waiting Tone.
4.
A non-controlling UCD station is allowed to activate CALL FORWARDING - BUSY LINE - D
2]. When this station sets CALL FORWARDING - BUSY LINE - D
to this station are call forwarded.
5.
The Attendant attempts BUSY VERIFICATION [B-3] to Station A. Station A has CALL
FORWARDING - BUSY LINE - D
allowed at Station A. If Station A has set CALL FORWARDING - BUSY LINE - D
Console, BUSY VERIFICATION [B-3] is allowed at Station A.
6.
When CALL FORWARDING - BUSY LINE - D
originate calls.
7.
When a call follows call forwarding, the destination station is recorded for STATION MESSAGE
DETAIL RECORDING [S-10].
8.
STATION-TO-STATION CALLING [S-11] must be provided.
Page 118
Call Forwarding - Busy Line - D
A
Node
FCCS Link
term
set to Station B. If Station B is busy and part of a STATION
term
set to Station B. Station B is busy. BUSY VERIFICATION is
term
B
Node
TK
Station A has been set
Call Forwarding service to
Attendant Console B
term
, only calls that are directly dialed
term
is in effect, the activating station may be used to
NEAX2400 IPX Feature Programming Manual
term
and CALL
term
[C-
term
to the Attendant
NDA-24297, Issue 1
Advertisement
Table of Contents
