Table of Contents
Advertisement
Service Conditions (cont'd)
•
If OG call is from an ATTCON and Individual ATT Access Code is assigned, and also ANI
data is assigned:
KP - 0 - N**-****- ST
•
If OG call is from an ATTCON and Individual ATT Access Code is unassigned, and ANI data
is assigned:
KP - 0 - N**-****- ST
•
If OG call is from an ATTCON and ANI data is unassigned:
KP - 1 - ST
b.) Outgoing call from station/Attendant of Remote office, and call termination via CCIS of Main
Office.
•
If the outgoing call is from a station and ANI data is assigned:
KP - 0 - N**-****- ST
•
If the outgoing call is from a station and ANI data is unassigned:
KP - 2 - ST
•
If the outgoing call is from an Attendant and ANI data is assigned:
KP - 0 - N**-****- ST
•
If the outgoing call is from an Attendant and ANI data is unassigned:
KP - 1 - ST
c.) Outgoing call from station/Attendant of Remote office, and call termination to a TIE Line of
Main Office.
KP - 2 - ST
5.
An independent route is required for Enhanced 911 interface.
6.
After caller's number is sent out to the remote office by Enhanced 911-ANI, it takes some time before a
speech path is established.
7.
Enhanced 911-ANI - CCIS service data are assigned only at Main Office; no specific data are assigned at
the remote office
8.
Both ANI service and Enhanced 911-ANI UNIFIED NUMBER OF DIGITS [E-18] service must have
been assigned.
9.
The Central Office Code (COC) consists of 1-5 digits. If office number and station number are used, the
maximum total number of digits is still 5.
Example 1:
Office number: 82
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Automatic Number Identification (ANI) - CCIS
ANI sending number
Information digit
ANI sending number
Information digit
Information digit
ANI sending number
Information digit
Information digit
ANI sending number
Information digit
Information digit
Information digit
A-87
Page 811
Advertisement
Table of Contents
