Table of Contents
Advertisement
M-85D
General Description
This feature allows Message Waiting (MW) information to be displayed on the middle line (24 digits) of the LCD.
Operating Procedure
No manual operation is required.
Service Conditions
1.
The LCD displays the following information, when MESSAGE WAITING INDICATION - D
activated:
Initial Display
(Time Display)
When controlled by
MCI, Attendant or
station
2.
When this service is assigned to a D
remains unchanged.
3.
This service can be controlled via MAT command program.
4.
This service is available only when OAI service is not available (SYS1, Index=79, b6=1). When OAI
service is available (SYS1, Index=79, b6=0), the information cannot be displayed on the lower line of
LCD, but will be displayed on the upper line.
5.
While Message Waiting information control is being executed to a D
this service, time information is not displayed on the LCD. When Message Waiting information control is
cancelled, the time information display is resumed.
6.
For the FCCS network, this feature is available for a telephone number having less than 7 digits.
Programming
STEP 1:
ASYD - System Data 1, Index 79, Bit 6 = 1.
STEP 2:
AKYD - Assign the following data to the D
(MWD = 1: Message Waiting Indication in Service)
FCCS Programming
No unique programming is required for the FCCS network.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Message Waiting Indication - D
Message Waiting Indication - D
10:00 AM FRI 01 JAN 1999
term
term
MW
with a 1-line LCD, the service is not available, and the display
term
that executes this service.
term
term
equipped with a 2-line LCD by
M-85D
term
is
Page 535
Advertisement
Table of Contents
