Table of Contents
Advertisement
C-6D
General Description
This feature permits a D
Operating Procedure
To hold a call in progress without using the HOLD key
1.
Press TRANSFER key; receive special dial tone. The LCD displays:
2.
Dial the CALL HOLD [C-6] code; receive normal dial tone.
3.
The call in progress is held; the user may initiate a new call.
To release a new call and return to the original call
1.
Go on-hook, releasing the new call; or press the RECALL key.
2.
The original call will ring back to the D
To hold a new call and return to the original call
1.
Press TRANSFER key; receive special dial tone.
2.
Dial CALL HOLD [C-6] code; the new call is placed on HOLD, the original call is automatically returned.
By repeating the above steps, user can converse alternately with two parties.
Note:
A feature/line key may be programmed as a HOLD key
1.
While a call is in progress, press the HOLD key.
2.
The call is placed on HOLD, dial tone is restored.
3.
A new call may be dialed.
4.
To return to the original call, press the RECALL key.
term
On a D
, a SPEED CALLING - ONE TOUCH [S-26] may be used to place a call on HOLD
1.
Press feature key, plus a SPEED CALLING - ONE TOUCH [S-26] key. The LCD will display any
previously stored data.
2.
Press the RECALL key. The LCD displays:
This acts as a switch hook flash. See FLASH ENTRY - D
3.
Dial CALL HOLD [C-6] access code.
4.
Press SPEED CALLING - ONE TOUCH [S-26] key. The LCD displays:
5.
This key may now be used to access the CALL HOLD - D
6.
When engaged in a conversation, press the SPEED CALLING - ONE TOUCH [S-26] key with the stored
CALL HOLD - D
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Call Hold - D
Call Hold - D
term
user to HOLD a call in progress by using CALL HOLD - D
TRANSFER
(Time Display)
(Time Display)
SPEED SET
(Time Display)
term
access code.
term
term
term
.
term
[F-4D].
term
feature.
term
.
!
C-6D
Page 141
Advertisement
Table of Contents
