Table of Contents
Advertisement
L-3
Interactions (cont'd)
5.
CALL WAITING [C-12, 31]: Call Waiting cannot be activated on a station in lock-out. The calling party
will receive reorder tone.
6.
CALL HOLD [C-6]: From a special dial tone state, LINE lock-out will occur if a user attempting to place
a station on hold dials the CALL HOLD [C-6] access code and partially dials any number. The sequence
prior to lock-out is: interdigit time-out for 6 seconds, reorder tone for 30 seconds, optional Howler Tone
for 30 seconds. When the station in lock-out goes on-hook, it will be rung by the station on hold. The Busy
Lamp Field will not flash
7.
EXECUTIVE RIGHT-OF-WAY [E-1]: Reorder tone will be returned to a calling party that is attempting
Executive Override toward a station in lock-out.
8.
THREE-WAY CALLING [T-2]: An attempt to establish a Three-Way Conference with a station in lock-
out will result in the reorder tone being returned to the user making the attempt. The user can return to the
station on hold by switch hook flashing.
9.
With the following calls, when a user fails to hang up after the other party has disconnected, the station
will be placed in a lock-out condition after a 30-second reorder tone (time-out), optional 30-second Howler
Tone warning (time-out):
DIRECT INWARD DIALING (DID) call
STATION-TO-STATION call
Trunk-to-Station call
Attendant-to-Station call
10.
CALL BACK [C-1]: To activate Call Back, the user dials the appropriate access code after reaching a busy
station. If the user fails to go on-hook within 30 seconds after receiving service set tone, LINE lock-out
will occur. The sequence prior to lock-out is: Service set tone for 30 seconds, reorder tone for 30 seconds,
optional Howler Tone warning for 30 seconds. Call Back cannot be activated toward a station in lock-out.
11.
CALL WAITING - ORIGINATING [C-31]: If a user fails to complete dialing of the access code while
attempting to activate CALL WAITING - ORIGINATING [C-31], LINE lock-out will occur.
12.
A station in LINE lock-out will be restored to service when the user goes on-hook for 280 milliseconds or
more.
13.
MESSAGE REMINDER [M-19D]: A Message Reminder cannot be sent to a station in LINE lock-out.
14.
ATTENDANT NIGHT TRANSFER [A-19] is not available if the Night Transfer Station is in LINE
lockout. The caller will hear ringback tone then reorder tone.
Programming
ASYD - System Data 1, Index 64, Bits 3 & 4. When is Howler Tone sent? 00: Not sent. 01: Only once.
10: Every thirty seconds.
System Data 1, Index 70, Bit 1. Does station in LINE lock-out flash at BLF? 0/1: Yes/No.
System Data 1, Index 128. This timer determines how long a register will be held up before the first
digit is dialed. Assign 00H for default value of 12 seconds (RAM data is 06H).
System Data 1, Index 146. First Howler Tone is sent. Assign 00H for standard default setting of 30
seconds (RAM data is 3FH), on analog ports.
Page 424
Line Lockout
[D-8]
[S-11]
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
