C-7D Call Pickup - Group - D Term - NEC NEAX2400 IPX Programming Manual

Feature programming manual
Hide thumbs Also See for NEAX2400 IPX:
Table of Contents

Advertisement

C-7D
C-7D
General Description
This feature permits a user to answer any call directed to another line in his preset CALL PICKUP - GROUP by
using a programmable line/feature key.
CALL PICKUP - GROUP - D
A user can be assigned to an additional CALL PICKUP GROUP, referred to as EXPANDED CALL PICKUP
GROUP.
Operating Procedure
To answer an incoming call
1.
A station within the CALL PICKUP GROUP rings.
2.
Lift the handset; receive dial tone.
3.
Press the CALL PICKUP - GROUP feature key; the call is connected to the station. The LCD displays:
When the telephone number of the called/calling station exceeds 8 digits, the last 8 digits are displayed.
Note:
However, a maximum of 16-digit calling telephone number can be displayed on the middle line of the LCD,
depending on the system data.
To answer an incoming call CALL HOLD [C-6]
1.
A station within the CALL PICKUP GROUP rings.
2.
Press the TRANSFER/HOLD feature key; receive special dial tone.
3.
Press the CALL PICKUP GROUP feature key; the call is connected to the station.
4.
The first party is put on CALL HOLD [C-6] status.
To pick up an incoming call within the EXPANDED CALL PICKUP GROUP
1.
A station within the EXPANDED CALL PICKUP GROUP rings.
2.
Lift the handset; receive dial tone.
3.
Dial the access code or press the feature key for EXPANDED CALL PICKUP; the call is connected to the
station.
Service Conditions
1.
A station assigned a fully restricted CLASS OF SERVICE-INDIVIDUAL [C-15] will be unable to answer
incoming Central Office calls using this feature.
2.
A CALL PICKUP GROUP - D
calls using the CALL PICKUP feature.
3.
A maximum of 100 stations can be assigned to each group. There is no limit to the amount of groups per
system.
4.
If CALL PICKUP GROUP - D
the system will connect the calls in the order of priority assigned to the call pick up chain.
5.
CALL PICKUP GROUP - D
Recall or CALLBACK [C-1] from another station.
Page 150
Call Pickup - Group - D
Call Pickup - Group - D
term
may be used by seizing dial tone from any multi-line appearance on the D
Called Station
PICKUP XXXX
(Time Display)
term
is defined as those stations having the ability to pick up other station's
term
is activated while two or more stations within the group are ringing,
term
cannot be used to answer OUTGOING TRUNK QUEUING [O-2],
term
Calling Station Trunk
XXXX
NEAX2400 IPX Feature Programming Manual
term
NDA-24297, Issue 1
term
.

Advertisement

Table of Contents
loading

Table of Contents