Table of Contents
Advertisement
E-8
Operating Procedure (cont'd)
5.
Station A hangs up; Stations C and B remain connected with each other until either or both go on-hook.
Service Conditions
1.
Two burst tones are transmitted upon activation to alert connected parties that an EXECUTIVE override
connection is being made.
2.
EXECUTIVE Right-of-Way may be denied if the busy station is:
a.) Dialing or in LINE LOCKOUT [L-3]
b.) Listening to a tone
c.) Being rung
d.) Protected from override via CLASS OF SERVICE-INDIVIDUAL [C-15]
e.) Protected by DATA LINE SECURITY [D-12]
f.) Being connected to an Attendant loop
g.) Activating a conflicting feature such as:
Attendant CAMP-ON WITH TONE INDICATION - CCIS
BUSY VERIFICATION - CCIS
CALL FORWARDING-ALL CALLS
CALL HOLD
CALL TRANSFER - CCIS
CONSULTATION HOLD-ALL CALLS - CCIS
CALL PARK
CALL WAITING-TERMINAL
THREE-WAY CALLING
In any of the above instances, the calling station will receive reorder tone.
3.
If after the 3-Way bridge is established, one party disconnects, the remaining two parties will still be
connected.
4.
The maximum number of simultaneous EXECUTIVE overrides allowable is dependent on the number of
Digital Conference Trunks included in the TSW/MUX cards at the called office on the CCIS network.
5.
This feature can be denied on DICTATION [D-3] and PAGING [P-1] connections through programming
in system data.
Programming
STEP 1:
ASYD - System 2, Index 0, Bit 1. Assigns Executive Right-of-Way (1).
STEP 2:
ANPD - Assigns minimum necessary number of digits for the first number of the access code for
Executive Right-of-Way.
STEP 3:
ASPA - Assigns the access code for Executive Right-of-Way.
CI = B (Busy)
SRV = SSC (Service Code)
SID = 4
Page 912
Executive Right-of-Way - CCIS
STN (a)
[Node A]
STN (c)
CCIS
[Node B]
NEAX2400 IPX Feature Programming Manual
STN (b)
[A-45]
[B-9]
[C-5]
[C-6]
[C-50, 54]
[C-58]
[C-29]
[C-12]
[T-2]
NDA-24297, Issue 1
Advertisement
Table of Contents
