Table of Contents
Advertisement
D-72
Service Conditions (cont'd)
Example 3: When five-digit station numbering is used, only the station number is displayed:
Note:
When the telephone number exceeds 6 digits, last 6 digits are displayed.
Interactions
1.
CALL FORWARDING - CCIS [C-45, 46, 47]: Calls are forwarded from Station A to Station B. When the
Attendant extends a call to Station A, Station B's number is indicated on the DIGITAL DISPLAY-
STATION rather than Station A's number.
2.
STATION HUNTING [S-7, 8, 9]: The Attendant Console extends a call to a busy telephone in a Hunt
group. The terminating telephone number is indicated on the DIGITAL DISPLAY-STATION rather than
the called telephone number.
3.
DIGITAL DISPLAY STATION feature will occur whenever the Attendant performs any of the following
actions:
a.) Extends an incoming call to a user.
b.) Originates a call to a user.
c.) Answers a recall or call forwarding call.
d.) Re-enters a held station call.
Programming
ASYD - System Data 1, Index 82, Bits 4-7. Assign a hex value according to the length of station
number choice.
HEX- Station Information:
0: TN + CLS + 4-digit Station Number.
1: TN + 4-digit Station Number.
2: RSC+ 4-digit Station Number.
3: TN + 5-digit Station Number.
4: RSC+ 5-digit Station Number.
5: Station Number.
Page 896
Digital Display - Station - CCIS
2
2
1
Telephone
1
2
Number
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
